|
Boxing Rings
Boxing has been viewed as one of the most dangerous and perhaps the
deadliest sports we have today. Prior to the 1920s boxers are in their
bareknuckles when they face their opponents. Even with the introduction of
the gloves as must haves for boxers during every fight in boxing rings still
the sport has claimed so many lives and have put others in the sideline
because of the debilitating effects that boxing brings after so many years.
Lucky are those who have become successful even in short stint in many
boxing rings either for practice or for tournaments. Truly some have made
boxing as their ticket to stardom and a luxurious life. Many known boxers
today have amassed their wealth through the countless times they fought
above boxing rings winning every fight.
You might wonder what those boxing rings are made of? Are they safe enough
to protect boxers in their every fall?
Generally boxing rings are fundamentally comprised so many different parts.
One of the important of which is the platform that is exactly measures
20’’x20’’ in all sides. For the very obvious reason a metal-made platform is
much stronger than wood; however the latter is much cheaper than the former
and just as strong. For practice purposes the wooden platform will do just
fine, but for tournament the metal platform is a must.
The platform is covered with either a canvas or a vinyl; again obviously
canvas is cheaper than vinyl. The regulatory measurement of the thickness of
the canvass should be 16 ounces because with this thickness the canvas or
the vinyl can already last t for so many years. However have it thicker with
perhaps two inches more will make it last longer. The flooring where the
canvas or the vinyl is laid should measure 24’’x24’’ on all sides. Using
canvas will need painting job but not with vinyl.
The one that probably protects the boxers when they fall on the floor is the
protective padding thaw is made of foam. Yes, the floor of all boxing rings
is foam padded. This is not only to protect the boxers each time they fall
but also cushion their feet to lessen the impact. Generally the thickness of
the foam is only one inch however different sanctioning bodies required
otherwise.
Other protective elements in boxing rings are the ropes, which are attached
in every corner. These ropes are likewise covered to protect the body of the
boxer from friction. The corner posts are likewise padded wish cushioning
material like foam.
Even the with the apparent deadly nature of boxing, all the people involved
are putting so much efforts for protection and safety. The boxing ring is
one of the many examples.
|
